Illustrative render of the Golisi S26 cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
46 g
18650LMO Mooch-tested · 25 A

Golisi S26

Golisi · released 2017
Capacity2600 mAh9.36 Wh · 203.48 Wh/kg
Mooch continuous25 ASize to this figure
Resistance19DC internal resistance
Voltage window3.6 V2.5 – 4.2 V
Standard charge2000 mA~1.3 h to full

At 2600 mAh, this ranks #96 of 279 18650 cells in our database. Mid-range for capacity among 18650 cells. Higher discharge than 84% of 18650 cells in our database. Great for high-drain builds.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryLMO
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge25A (Mooch-tested)
Mooch CDR (trusted)25 A
Standard charge current2000 mA
Internal resistance19 mΩ
Physical
Form factor18650
Weight46 g
Top typeFlat Top
ProtectedNo
Wrap colorBlack
Performance
Capacity2600 mAh
Energy9.36 Wh
Specific energy203.48 Wh/kg
Power density (gravimetric)1,957 W/kg
Cycle life800 cycles
Year released2017
Operating Limits
Charge temp0°C to 45°C
Discharge temp-20°C to 60°C

Independent test data: Mooch's test of the S26 ↗

At the standard 2000 mA charge rate, a full charge takes about 1.3 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Golisi S26 (2600mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.52 A5h 00m
0.5C1.3 A2h 00m
1C2.6 A1h 00m
2C5.2 A30m
3C7.8 A20m
5C13 A12m
8C20.8 A7m 30s
10C26 A6m

Highlighted row is closest to the rated 25A continuous discharge.

Charging

RateCurrentEstimated time
0.5C1,300 mA~2h 00m
Standard2,000 mA~1h 18m
1C2,600 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P2,600 mAh9.4 Wh25 A
2P5,200 mAh18.7 Wh50 A
3P7,800 mAh28.1 Wh75 A
4P10,400 mAh37.4 Wh100 A
5P13,000 mAh46.8 Wh125 A
6P15,600 mAh56.2 Wh150 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal5,200mAh131Wh50A maxCell weight: 0.64 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal10,400mAh487Wh100A maxCell weight: 2.39 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal10,400mAh599Wh100A maxCell weight: 2.94 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal15,600mAh225Wh150A maxCell weight: 1.1 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksGood balance of capacity for range and discharge for hills. Works well in most ebike packs.
Car AudioEnough discharge to handle amplifier bursts without voltage sag.
High-Drain VapingAbove the 25A Mooch CDR threshold. Suitable for regulated and mechanical mods.
FlashlightsDecent runtime. Works well for most flashlights.
Power ToolsSufficient discharge and capacity for most power tool packs.

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Golisi S26 (this cell)260025A9.3646g203.48
Efest EFEST 35A 2900mAh290035A10.4
Efest 18650 2800mAh 35A280035A10.146g219
AWT 40A 2600mAh260040A9.4
AWT YELLOW 40A 2600mAh260040A9.4
Xtar XTVTC4220025A7.9

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.