Illustrative render of the Vapcell N41 cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
18.3 × 65 mm · 48 g
18650NMC Mooch-tested · 10 A

Vapcell N41

Vapcell · released 2025
Capacity4050 mAh14.58 Wh · 303.75 Wh/kg
Mooch continuous10 ASize to this figure
Resistance17DC internal resistance
Voltage window3.6 V2.5 – 4.2 V
Standard charge1500 mA~2.7 h to full

At 4050 mAh, this ranks #1 of 279 18650 cells in our database. Near the top for capacity among 18650 cells. More capacity than 100% of 18650 cells in our database. One of the higher-capacity options.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge10A (Mooch-tested)
Mooch CDR (trusted)10 A
Standard charge current1500 mA
Internal resistance17 mΩ
Physical
Form factor18650
Dimensions18.3mm × 65mm
Weight48 g
Top typeFlat Top
ProtectedNo
Wrap colorBlue/Pink
Performance
Capacity4050 mAh
Energy14.58 Wh
Specific energy303.75 Wh/kg
Energy density852.81 Wh/L
Power density (gravimetric)750 W/kg
Power density (volumetric)2,106 W/L
Cycle life1000 cycles
Year released2025

Independent test data: Mooch's test of the N41 ↗

At the standard 1500 mA charge rate, a full charge takes about 2.7 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Vapcell N41 (4050mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.81 A5h 00m
0.5C2.03 A2h 00m
1C4.05 A1h 00m
2C8.1 A30m

Highlighted row is closest to the rated 10A continuous discharge.

Charging

RateCurrentEstimated time
Standard1,500 mA~2h 42m
0.5C2,025 mA~2h 00m
1C4,050 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Datasheet

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P4,050 mAh14.6 Wh10 A
2P8,100 mAh29.2 Wh20 A
3P12,150 mAh43.7 Wh30 A
4P16,200 mAh58.3 Wh40 A
5P20,250 mAh72.9 Wh50 A
6P24,300 mAh87.5 Wh60 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal8,100mAh204Wh20A maxCell weight: 0.67 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal16,200mAh758Wh40A maxCell weight: 2.5 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal16,200mAh933Wh40A maxCell weight: 3.07 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal24,300mAh350Wh60A maxCell weight: 1.15 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksGood balance of capacity for range and discharge for hills. Works well in most ebike packs.
Car AudioMight work for smaller setups. Check your amp's peak current draw.
High-Drain VapingBelow the 25A Mooch CDR threshold that high-drain vaping needs. Use a higher-drain cell.
FlashlightsHigh capacity means long runtime. Great for everyday carry and extended use.
Power ToolsMay work for lighter-duty tools. Check your tool's current requirements.

Physical dimensions

Dimensions18.3mm × 65mm
TopFlat Top
Format18650

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Vapcell N41 (this cell)405010A14.5848g303.75
Amprius INR18650/40400012A14.448g300
Vapcell N40400010A14.448g300
Vapcell F38380010A13.748g285
Vapcell N3636508A13.148g274

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.