Illustrative render of the Dmegc 45E cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
21.4 × 70.75 mm · 70 g
21700NMC Mooch-tested · 13 A

Dmegc 45E

Dmegc
Capacity4500 mAh16.2 Wh · 231.43 Wh/kg
Mooch continuous13 ASize to this figure
Voltage window3.6 V2.5 – 4.2 V
Standard charge4500 mA~1 h to full

At 4500 mAh, this ranks #40 of 72 21700 cells in our database. Mid-range for capacity among 21700 cells. A mid-range 21700 cell. Solid for builds that don't need extreme capacity or discharge.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge13A (Mooch-tested)
Mooch CDR (trusted)13 A
Standard charge current4500 mA
Physical
Form factor21700
Dimensions21.4mm × 70.75mm
Weight70 g
Top typeFlat Top
ProtectedNo
Performance
Capacity4500 mAh
Energy16.2 Wh
Specific energy231.43 Wh/kg
Energy density636.61 Wh/L
Power density (gravimetric)669 W/kg
Power density (volumetric)1,839 W/L
Cycle life800 cycles
Operating Limits
Charge temp0°C to 45°C
Discharge temp-20°C to 60°C

Independent test data: Mooch's test of the 45E ↗

At the standard 4500 mA charge rate, a full charge takes about 1 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Dmegc 45E (4500mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.9 A5h 00m
0.5C2.25 A2h 00m
1C4.5 A1h 00m
2C9 A30m
3C13.5 A20m

Highlighted row is closest to the rated 13A continuous discharge.

Charging

RateCurrentEstimated time
0.5C2,250 mA~2h 00m
1C4,500 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P4,500 mAh16.2 Wh13 A
2P9,000 mAh32.4 Wh26 A
3P13,500 mAh48.6 Wh39 A
4P18,000 mAh64.8 Wh52 A
5P22,500 mAh81 Wh65 A
6P27,000 mAh97.2 Wh78 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal9,000mAh227Wh26A maxCell weight: 0.98 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal18,000mAh842Wh52A maxCell weight: 3.64 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal18,000mAh1037Wh52A maxCell weight: 4.48 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal27,000mAh389Wh78A maxCell weight: 1.68 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksGood balance of capacity for range and discharge for hills. Works well in most ebike packs.
Car AudioMight work for smaller setups. Check your amp's peak current draw.
High-Drain VapingBelow the 25A Mooch CDR threshold that high-drain vaping needs. Use a higher-drain cell.
FlashlightsHigh capacity means long runtime. Great for everyday carry and extended use.
Power ToolsMay work for lighter-duty tools. Check your tool's current requirements.

Physical dimensions

Dimensions21.4mm × 70.75mm
TopFlat Top
Format21700

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Dmegc 45E (this cell)450013A16.270g231.43
Ampace JP50P1500040A1872g250
Amprius INR21700-50Q500050A1870g257
BAK N21700CG500050A1870g257
Efest 21700 5000mAh 10A500010A1869g261
Epoch 21700 5000mAh500010A1869g261

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.