Illustrative render of the LG M50LT cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
21.44 × 70.8 mm · 67 g
21700NMC Mooch-tested · 14 A

LG M50LT

LG · released 2020
Capacity4932 mAh17.76 Wh · 265.07 Wh/kg
Mooch continuous14 ASize to this figure
Voltage window3.6 V2.5 – 4.2 V
Standard charge1440 mA~3.4 h to full

At 4932 mAh, this ranks #37 of 72 21700 cells in our database. Mid-range for capacity among 21700 cells. A mid-range 21700 cell. Solid for builds that don't need extreme capacity or discharge.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge14A (Mooch-tested)
Mooch CDR (trusted)14 A
Standard charge current1440 mA
Standard discharge current1440mA
Physical
Form factor21700
Dimensions21.44mm × 70.8mm
Weight67 g
Top typeFlat Top
ProtectedNo
Wrap colorClear
Performance
Capacity4932 mAh
Energy17.76 Wh
Specific energy265.07 Wh/kg
Energy density694.82 Wh/L
Power density (gravimetric)752 W/kg
Power density (volumetric)1,972 W/L
Cycle life1000 cycles
Year released2020

Independent test data: Mooch's test of the M50LT ↗

At the standard 1440 mA charge rate, a full charge takes about 3.4 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: LG M50LT (4932mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.99 A5h 00m
0.5C2.47 A2h 00m
1C4.93 A1h 00m
2C9.86 A30m

Highlighted row is closest to the rated 14A continuous discharge.

Charging

RateCurrentEstimated time
Standard1,440 mA~3h 25m
0.5C2,466 mA~2h 00m
1C4,932 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Datasheet

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P4,932 mAh17.8 Wh14 A
2P9,864 mAh35.5 Wh28 A
3P14,796 mAh53.3 Wh42 A
4P19,728 mAh71 Wh56 A
5P24,660 mAh88.8 Wh70 A
6P29,592 mAh106.5 Wh84 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal9,864mAh249Wh28A maxCell weight: 0.94 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal19,728mAh923Wh56A maxCell weight: 3.48 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal19,728mAh1136Wh56A maxCell weight: 4.29 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal29,592mAh426Wh84A maxCell weight: 1.61 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksGood balance of capacity for range and discharge for hills. Works well in most ebike packs.
Car AudioMight work for smaller setups. Check your amp's peak current draw.
High-Drain VapingBelow the 25A Mooch CDR threshold that high-drain vaping needs. Use a higher-drain cell.
FlashlightsHigh capacity means long runtime. Great for everyday carry and extended use.
Power ToolsMay work for lighter-duty tools. Check your tool's current requirements.

Physical dimensions

Dimensions21.44mm × 70.8mm
TopFlat Top
Format21700

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
LG M50LT (this cell)493214A17.7667g265.07
BAK 53E530010A19.169g277
Samsung INR21700-53G530010A19.172g265
LG M50T501414A18.170g258
Ampace JP50P1500040A1872g250
Amprius INR21700-50Q500050A1870g257

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.