Illustrative render of the LG LGABD21865 cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
18.29 × 65.15 mm · 49 g
18650NMC Mooch-tested · 60 A

LG LGABD21865

LG · also sold as INR18650D2 · released 2015
Capacity2950 mAh10.74 Wh · 219.18 Wh/kg
Mooch continuous60 ASize to this figure
Voltage window3.64 V2.8 – 4.2 V
Standard charge1475 mA~2 h to full

At 2950 mAh, this ranks #23 of 169 18650 cells in our database. Near the top for capacity among 18650 cells. Top tier for both capacity and discharge. One of the best all-around 18650 cells.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.64 V
Max charge voltage4.2 V
Discharge cutoff2.8 V
Max continuous discharge60A (Mooch-tested)
Mooch CDR (trusted)60 A
Standard charge current1475 mA
Standard discharge current590mA
Physical
Form factor18650
Dimensions18.29mm × 65.15mm
Weight49 g
Top typeFlat Top
ProtectedNo
Wrap colorBlue
Insulator ringWhite
Performance
Capacity2950 mAh
Energy10.74 Wh
Specific energy219.18 Wh/kg
Energy density627.44 Wh/L
Power density (gravimetric)4,457 W/kg
Power density (volumetric)12,759 W/L
Cycle life300 cycles
Year released2015
Operating Limits
Charge temp0°C to 45°C
Discharge temp-20°C to 60°C

Independent test data: Mooch's test of the LGABD21865 ↗

At the standard 1475 mA charge rate, a full charge takes about 2 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.8V
Nominal
3.64V
Max charge
4.2V

Usable range: 1.4V

C-rate conversion: LG LGABD21865 (2950mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.59 A5h 00m
0.5C1.48 A2h 00m
1C2.95 A1h 00m
2C5.9 A30m
3C8.85 A20m
5C14.75 A12m
8C23.6 A7m 30s
10C29.5 A6m
15C44.25 A4m
20C59 A3m

Highlighted row is closest to the rated 60A continuous discharge.

Charging

RateCurrentEstimated time
0.5C1,475 mA~2h 00m
1C2,950 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Datasheet

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.8VFlashlights, single-cell devices
2S7.3V8.4V5.6VRC vehicles, 7.2V packs
3S10.9V12.6V8.4VPower tools (10.8V nominal)
4S14.6V16.8V11.2VEbike (small), some power tools
7S25.5V29.4V19.6VEbike (24V system)
10S36.4V42V28VEbike (36V system)
13S47.3V54.6V36.4VEbike (48V standard)
14S51V58.8V39.2VEbike (52V high-power)
16S58.2V67.2V44.8VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P2,950 mAh10.7 Wh60 A
2P5,900 mAh21.5 Wh120 A
3P8,850 mAh32.2 Wh180 A
4P11,800 mAh43 Wh240 A
5P14,750 mAh53.7 Wh300 A
6P17,700 mAh64.4 Wh360 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.5V nominal5,900mAh150Wh120A maxCell weight: 0.69 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells47.3V nominal11,800mAh558Wh240A maxCell weight: 2.55 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells58.2V nominal11,800mAh687Wh240A maxCell weight: 3.14 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.6V nominal17,700mAh258Wh360A maxCell weight: 1.18 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksGood balance of capacity for range and discharge for hills. Works well in most ebike packs.
Car AudioEnough discharge to handle amplifier bursts without voltage sag.
High-Drain VapingAbove the 25A Mooch CDR threshold. Suitable for regulated and mechanical mods.
FlashlightsDecent runtime. Works well for most flashlights.
Power ToolsSufficient discharge and capacity for most power tool packs.

Physical dimensions

Dimensions18.29mm × 65.15mm
TopFlat Top
Format18650

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
LG LGABD21865 (this cell)295060A10.7449g219.18
LG LGABF1L186533504.9A12.249g248
LG LGGBF1L186533504.9A12.2
Panasonic NCR18650B33504A12.147.5g254
LG LGABE1186532009A1249g245
LG LGEBE1186532004.9A12

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.8V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.