Illustrative render of the Panasonic NCR18650B cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
18.25 × 65.1 mm · 47.5 g
18650NMC Mooch-tested · 4 A

Panasonic NCR18650B

Panasonic · released 2012
Capacity3350 mAh12.06 Wh · 253.89 Wh/kg
Mooch continuous4 ASize to this figure
Voltage window3.6 V2.5 – 4.2 V
Standard charge1625 mA~2.1 h to full

At 3350 mAh, this ranks #3 of 169 18650 cells in our database. Near the top for capacity among 18650 cells. More capacity than 99% of 18650 cells in our database, but lower discharge than average.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge4A (Mooch-tested)
Mooch CDR (trusted)4 A
Standard charge current1625 mA
Standard discharge current670mA
Physical
Form factor18650
Dimensions18.25mm × 65.1mm
Weight47.5 g
Top typeFlat Top
ProtectedNo
Wrap colorGreen (Light)
Insulator ringWhite
Performance
Capacity3350 mAh
Energy12.06 Wh
Specific energy253.89 Wh/kg
Energy density708.19 Wh/L
Power density (gravimetric)303 W/kg
Power density (volumetric)846 W/L
Year released2012
Operating Limits
Charge temp10°C to 45°C
Discharge temp-20°C to 60°C

Independent test data: Mooch's test of the NCR18650B ↗

At the standard 1625 mA charge rate, a full charge takes about 2.1 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Panasonic NCR18650B (3350mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.67 A5h 00m
0.5C1.68 A2h 00m
1C3.35 A1h 00m

Highlighted row is closest to the rated 4A continuous discharge.

Charging

RateCurrentEstimated time
0.5C1,675 mA~2h 00m
1C3,350 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Datasheet

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P3,350 mAh12.1 Wh4 A
2P6,700 mAh24.1 Wh8 A
3P10,050 mAh36.2 Wh12 A
4P13,400 mAh48.2 Wh16 A
5P16,750 mAh60.3 Wh20 A
6P20,100 mAh72.4 Wh24 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal6,700mAh169Wh8A maxCell weight: 0.67 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal13,400mAh627Wh16A maxCell weight: 2.47 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal13,400mAh772Wh16A maxCell weight: 3.04 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal20,100mAh289Wh24A maxCell weight: 1.14 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksNot enough discharge for ebike use. Voltage sag would be a problem under load.
Car AudioNot enough discharge for car audio amplifiers. You need at least 15-20A continuous for most setups.
High-Drain VapingBelow the 25A Mooch CDR threshold that high-drain vaping needs. Use a higher-drain cell.
FlashlightsHigh capacity means long runtime. Great for everyday carry and extended use.
Power ToolsNot enough discharge or capacity for power tool use.

Physical dimensions

Dimensions18.25mm × 65.1mm
TopFlat Top
Format18650

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Panasonic NCR18650B (this cell)33504A12.0647.5g253.89
LG LGEBMJ11865350010A12.7
LG LGDBMJ11865350010A12.749g259
LG LGABF1L186533504.9A12.249g248
LG LGGBF1L186533504.9A12.2
LG LGABE1186532009A1249g245

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.