Illustrative render of the Cham CMICR18650F cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
18.3 × 65 mm · 45.5 g
18650NMC

Cham CMICR18650F

Cham · released 2011
Capacity2600 mAh9.62 Wh · 211.43 Wh/kg
Rated continuous2.6 A2.55A
Resistance40DC internal resistance
Voltage window3.7 V2.5 – 4.2 V
Standard charge1300 mA~2 h to full

At 2600 mAh, this ranks #96 of 279 18650 cells in our database. Mid-range for capacity among 18650 cells. A mid-range 18650 cell. Solid for builds that don't need extreme capacity or discharge.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.7 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge2.55A
Standard charge current1300 mA
Standard discharge current2600mA
Internal resistance40 mΩ
Physical
Form factor18650
Dimensions18.3mm × 65mm
Weight45.5 g
Top typeFlat Top
ProtectedNo
Wrap colorBlue
Insulator ringGrey
Performance
Capacity2600 mAh
Energy9.62 Wh
Specific energy211.43 Wh/kg
Energy density562.69 Wh/L
Power density (gravimetric)211 W/kg
Power density (volumetric)563 W/L
Cycle life300 cycles
Year released2011
Operating Limits
Charge temp0°C to 45°C
Discharge temp-20°C to 60°C

At the standard 1300 mA charge rate, a full charge takes about 2 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.7V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Cham CMICR18650F (2600mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.52 A5h 00m
0.5C1.3 A2h 00m
1C2.6 A1h 00m

Highlighted row is closest to the rated 2.6A continuous discharge.

Charging

RateCurrentEstimated time
0.5C1,300 mA~2h 00m
1C2,600 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Datasheet

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.7V4.2V2.5VFlashlights, single-cell devices
2S7.4V8.4V5VRC vehicles, 7.2V packs
3S11.1V12.6V7.5VPower tools (10.8V nominal)
4S14.8V16.8V10VEbike (small), some power tools
7S25.9V29.4V17.5VEbike (24V system)
10S37V42V25VEbike (36V system)
13S48.1V54.6V32.5VEbike (48V standard)
14S51.8V58.8V35VEbike (52V high-power)
16S59.2V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P2,600 mAh9.6 Wh2.6 A
2P5,200 mAh19.2 Wh5.2 A
3P7,800 mAh28.9 Wh7.8 A
4P10,400 mAh38.5 Wh10.4 A
5P13,000 mAh48.1 Wh13 A
6P15,600 mAh57.7 Wh15.6 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.9V nominal5,200mAh135Wh5A maxCell weight: 0.64 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells48.1V nominal10,400mAh500Wh10A maxCell weight: 2.37 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells59.2V nominal10,400mAh616Wh10A maxCell weight: 2.91 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.8V nominal15,600mAh231Wh16A maxCell weight: 1.09 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksNot enough discharge for ebike use. Voltage sag would be a problem under load.
Car AudioNot enough discharge for car audio amplifiers. You need at least 15-20A continuous for most setups.
High-Drain VapingBelow the 25A Mooch CDR threshold that high-drain vaping needs. Use a higher-drain cell.
FlashlightsDecent runtime. Works well for most flashlights.
Power ToolsNot enough discharge or capacity for power tool use.

Physical dimensions

Dimensions18.3mm × 65mm
TopFlat Top
Format18650

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Cham CMICR18650F (this cell)26002.6A9.6245.5g211.43
LG LGABD1186530005.8A11.348.5g232
LG LGDBD1186530005.8A11.348.5g232
Nitecore NL1831310035A11.2
Panasonic NCR18650BD310010A11.249.5g225
Samsung ICR18650-30B29505.9A11.248g232

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.