Illustrative render of the Nitecore 18650 2100mAh 30A cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
18.2 × 65 mm · 44 g
18650NMC Mooch-tested · 30 A

Nitecore 18650 2100mAh 30A

Nitecore
Capacity2100 mAh7.56 Wh · 171.82 Wh/kg
Mooch continuous30 ASize to this figure
Voltage window3.6 V2.5 – 4.2 V
Standard charge2000 mA~1.1 h to full

At 2100 mAh, this ranks #212 of 279 18650 cells in our database. On the lower end for capacity among 18650 cells. Higher discharge than 90% of 18650 cells in our database. Great for high-drain builds.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge30A (Mooch-tested)
Mooch CDR (trusted)30 A
Standard charge current2000 mA
Physical
Form factor18650
Dimensions18.2mm × 65mm
Weight44 g
Top typeFlat Top
ProtectedNo
Performance
Capacity2100 mAh
Energy7.56 Wh
Specific energy171.82 Wh/kg
Energy density447.07 Wh/L
Power density (gravimetric)2,455 W/kg
Power density (volumetric)6,387 W/L
Operating Limits
Charge temp0°C to 45°C
Discharge temp-20°C to 60°C

Independent test data: Mooch's test of the 18650 2100mAh 30A ↗

At the standard 2000 mA charge rate, a full charge takes about 1.1 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Nitecore 18650 2100mAh 30A (2100mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.42 A5h 00m
0.5C1.05 A2h 00m
1C2.1 A1h 00m
2C4.2 A30m
3C6.3 A20m
5C10.5 A12m
8C16.8 A7m 30s
10C21 A6m
15C31.5 A4m

Highlighted row is closest to the rated 30A continuous discharge.

Charging

RateCurrentEstimated time
0.5C1,050 mA~2h 00m
Standard2,000 mA~1h 03m
1C2,100 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P2,100 mAh7.6 Wh30 A
2P4,200 mAh15.1 Wh60 A
3P6,300 mAh22.7 Wh90 A
4P8,400 mAh30.2 Wh120 A
5P10,500 mAh37.8 Wh150 A
6P12,600 mAh45.4 Wh180 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal4,200mAh106Wh60A maxCell weight: 0.62 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal8,400mAh393Wh120A maxCell weight: 2.29 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal8,400mAh484Wh120A maxCell weight: 2.82 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal12,600mAh181Wh180A maxCell weight: 1.06 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsUsable for powerwalls but lower capacity means you'll need more cells to hit your target kWh.
Ebike PacksMarginal. Check your motor's peak draw first. You might get voltage sag under load.
Car AudioEnough discharge to handle amplifier bursts without voltage sag.
High-Drain VapingAbove the 25A Mooch CDR threshold. Suitable for regulated and mechanical mods.
FlashlightsLower capacity means shorter runtime. Better cells are available for flashlight use.
Power ToolsSufficient discharge and capacity for most power tool packs.

Physical dimensions

Dimensions18.2mm × 65mm
TopFlat Top
Format18650

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Nitecore 18650 2100mAh 30A (this cell)210030A7.5644g171.82
LG LGDB11865026009.8
LG LGDBB1186526005.1A9.8
BAK C18650CC26002A9.648g200
Cham CMICR18650F26009.645.5g211
GP Batteries ICR18650-26F26005A9.647g205

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.