Illustrative render of the Vapcell PURPLE 30A 2400mAh cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
18.3 × 64.8 mm · 46 g
18650NMC Mooch-tested · 30 A

Vapcell PURPLE 30A 2400mAh

Vapcell · released 2018
Capacity2400 mAh8.64 Wh · 187.83 Wh/kg
Mooch continuous30 ASize to this figure
Resistance10DC internal resistance
Voltage window3.6 V2.5 – 4.2 V
Standard charge1000 mA~2.4 h to full

At 2400 mAh, this ranks #153 of 279 18650 cells in our database. Mid-range for capacity among 18650 cells. Higher discharge than 90% of 18650 cells in our database. Great for high-drain builds.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge30A (Mooch-tested)
Mooch CDR (trusted)30 A
Standard charge current1000 mA
Standard discharge current480mA
Internal resistance10 mΩ
Physical
Form factor18650
Dimensions18.3mm × 64.8mm
Weight46 g
Top typeFlat Top
ProtectedNo
Wrap colorPurple
Performance
Capacity2400 mAh
Energy8.64 Wh
Specific energy187.83 Wh/kg
Energy density506.93 Wh/L
Power density (gravimetric)2,348 W/kg
Power density (volumetric)6,337 W/L
Year released2018
Operating Limits
Charge temp0°C to 45°C
Discharge temp-20°C to 70°C

Independent test data: Mooch's test of the PURPLE 30A 2400mAh ↗

At the standard 1000 mA charge rate, a full charge takes about 2.4 hours. The last bit is a slow taper to top it off.

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Vapcell PURPLE 30A 2400mAh (2400mAh)

C-RateCurrent (A)Theoretical runtime
0.2C0.48 A5h 00m
0.5C1.2 A2h 00m
1C2.4 A1h 00m
2C4.8 A30m
3C7.2 A20m
5C12 A12m
8C19.2 A7m 30s
10C24 A6m

Highlighted row is closest to the rated 30A continuous discharge.

Charging

RateCurrentEstimated time
Standard1,000 mA~2h 24m
0.5C1,200 mA~2h 00m
1C2,400 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Datasheet

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P2,400 mAh8.6 Wh30 A
2P4,800 mAh17.3 Wh60 A
3P7,200 mAh25.9 Wh90 A
4P9,600 mAh34.6 Wh120 A
5P12,000 mAh43.2 Wh150 A
6P14,400 mAh51.8 Wh180 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal4,800mAh121Wh60A maxCell weight: 0.64 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal9,600mAh449Wh120A maxCell weight: 2.39 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal9,600mAh553Wh120A maxCell weight: 2.94 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal14,400mAh207Wh180A maxCell weight: 1.1 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsUsable for powerwalls but lower capacity means you'll need more cells to hit your target kWh.
Ebike PacksMarginal. Check your motor's peak draw first. You might get voltage sag under load.
Car AudioEnough discharge to handle amplifier bursts without voltage sag.
High-Drain VapingAbove the 25A Mooch CDR threshold. Suitable for regulated and mechanical mods.
FlashlightsLower capacity means shorter runtime. Better cells are available for flashlight use.
Power ToolsSufficient discharge and capacity for most power tool packs.

Physical dimensions

Dimensions18.3mm × 64.8mm
TopFlat Top
Format18650

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Vapcell PURPLE 30A 2400mAh (this cell)240030A8.6446g187.83
Panasonic NCR18650PD290010A10.744.5g241
LG LGABC1186528004.1A10.547g223
LG LGDC11865028004.1A10.547g223
Samsung ICR18650-28A28005.6A10.548g219
Samsung INR18650-29E29005A10.548g219

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.