Illustrative render of the Reliance RS60 cell✱ Render
Illustrative render generated from published specifications. Not a photograph of the actual cell.
21.35 × 70.3 mm · 71.5 g
21700NMC Mooch-tested · 50 A

Reliance RS60

Reliance · released 2025
Capacity5850 mAh21.06 Wh · 294.55 Wh/kg
Mooch continuous50 ASize to this figure
Voltage window3.6 V2.5 – 4.2 V

At 5850 mAh, this ranks #8 of 72 21700 cells in our database. Near the top for capacity among 21700 cells. Top tier for both capacity and discharge. One of the best all-around 21700 cells.

Photos from the community

See the wrap, markings, and terminals up close.

Have this cell in hand?

Community photo submissions are opening soon.

Full specifications

Electrical
ChemistryNMC
Nominal voltage3.6 V
Max charge voltage4.2 V
Discharge cutoff2.5 V
Max continuous discharge50A (Mooch-tested)
Mooch CDR (trusted)50 A
Physical
Form factor21700
Dimensions21.35mm × 70.3mm
Weight71.5 g
Top typeFlat Top
ProtectedNo
Performance
Capacity5850 mAh
Energy21.06 Wh
Specific energy294.55 Wh/kg
Energy density836.79 Wh/L
Power density (gravimetric)2,517 W/kg
Power density (volumetric)7,152 W/L
Cycle life500 cycles
Year released2025
Operating Limits
Charge temp-20°C to 60°C
Discharge temp-40°C to 80°C

Independent test data: Mooch's test of the RS60 ↗

Voltage operating window

Cutoff
2.5V
Nominal
3.6V
Max charge
4.2V

Usable range: 1.7V

C-rate conversion: Reliance RS60 (5850mAh)

C-RateCurrent (A)Theoretical runtime
0.2C1.17 A5h 00m
0.5C2.93 A2h 00m
1C5.85 A1h 00m
2C11.7 A30m
3C17.55 A20m
5C29.25 A12m
8C46.8 A7m 30s

Highlighted row is closest to the rated 50A continuous discharge.

Charging

RateCurrentEstimated time
0.5C2,925 mA~2h 00m
1C5,850 mA~1h 00m

These are estimates for the constant-current phase. Real charge time is a bit longer because of the slow taper at the end.

Pack scaling

Series voltage configurations

ConfigNominal VMax VMin VCommon use
1S3.6V4.2V2.5VFlashlights, single-cell devices
2S7.2V8.4V5VRC vehicles, 7.2V packs
3S10.8V12.6V7.5VPower tools (10.8V nominal)
4S14.4V16.8V10VEbike (small), some power tools
7S25.2V29.4V17.5VEbike (24V system)
10S36V42V25VEbike (36V system)
13S46.8V54.6V32.5VEbike (48V standard)
14S50.4V58.8V35VEbike (52V high-power)
16S57.6V67.2V40VDIY powerwall

Parallel capacity scaling

ConfigCapacityEnergyMax discharge
1P5,850 mAh21.1 Wh50 A
2P11,700 mAh42.1 Wh100 A
3P17,550 mAh63.2 Wh150 A
4P23,400 mAh84.2 Wh200 A
5P29,250 mAh105.3 Wh250 A
6P35,100 mAh126.4 Wh300 A

Example pack configurations

7S2P
24V ebike / small pack
14 cells25.2V nominal11,700mAh295Wh100A maxCell weight: 1 kg (add ~15% for wiring and BMS)
13S4P
48V ebike standard
52 cells46.8V nominal23,400mAh1095Wh200A maxCell weight: 3.72 kg (add ~15% for wiring and BMS)
16S4P
DIY powerwall
64 cells57.6V nominal23,400mAh1348Wh200A maxCell weight: 4.58 kg (add ~15% for wiring and BMS)
4S6P
Power tool replacement
24 cells14.4V nominal35,100mAh505Wh300A maxCell weight: 1.72 kg (add ~15% for wiring and BMS)

Design a custom pack with this cell:

Application suitability

PowerwallsHigh capacity means more stored energy per cell. Fewer cells needed for a given kWh target.
Ebike PacksGood balance of capacity for range and discharge for hills. Works well in most ebike packs.
Car AudioEnough discharge to handle amplifier bursts without voltage sag.
High-Drain VapingAbove the 25A Mooch CDR threshold. Suitable for regulated and mechanical mods.
FlashlightsHigh capacity means long runtime. Great for everyday carry and extended use.
Power ToolsSufficient discharge and capacity for most power tool packs.

Physical dimensions

Dimensions21.35mm × 70.3mm
TopFlat Top
Format21700

Similar cells

Same format and chemistry, within ±500mAh capacity:

CellmAhCDRWhWeightWh/kg
Reliance RS60 (this cell)585050A21.0671.5g294.55
Vapcell F63625012A22.5
Linkdata 60P600060A21.668g318
Vapcell F60600012A21.674g292
Reliance RH60585020A21.171g297
Lishen LR2170SK580016A20.9

Frequently asked questions

Handling and safety

Lithium cells can be dangerous if mishandled. A few things to keep in mind:

  • Never charge above 4.2V or discharge below 2.5V.
  • Store cells at around 3.6-3.8V (roughly 40-60% charge) for long-term storage.
  • Don't mix cells with different capacities, chemistries, or states of charge in a pack.
  • Inspect wraps before use. A torn wrap can cause a short circuit.
  • Always use a BMS or balance charger appropriate for your pack configuration.
  • Keep cells away from metal objects, keys, and coins. A short across the terminals can cause fire.

Get new tools and build tips

We are always adding tools, cell data, and guides. Drop your email for new tool releases and battery-building tips. No spam, unsubscribe anytime.

Specs come from manufacturer datasheets and independent testing; Mooch-tested discharge ratings are shown when available because they reflect real continuous performance better than headline datasheet numbers. Browse the full 18650 & 21700 cell database to compare every cell.

Disclaimer: We do our best to keep the information on this page accurate, but we cannot guarantee that all specifications are correct or up to date. Cell characteristics can vary between production batches and may change over time. Do not rely solely on this data for safety-critical applications. Always verify against the manufacturer's official datasheet before use.